View 30CTH02FPPBF_1116587.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

Bulletin PD-20894 rev. B 12/06
30CTH02PbF 30CTH02FPPBF
Hyperfast Rectifier
Features
* * * * * Hyperfast Recovery Time Low Forward Voltage Drop Low Leakage Current 175C Operating Junction Temperature Lead-Free ("PbF" suffix)
trr =30ns max. IF(AV) = 30Amp VR = 200V
Description/ Applications International Rectifier's 200V series are the state of the art Hyperfast recovery rectifiers specifically designed with optimized performance of forward voltage drop and hyperfast recovery time. The planar structure and the platinum doped life time control, guarantee the best overall performance, ruggedness and reliability characteristics. These devices are intended for use in the output rectification stage of SMPS, UPS, DC-DC converters as well as free-wheeling diode in low voltage inverters and chopper motor drives. Their extremely optimized stored charge and low recovery current minimize the switching losses and reduce over dissipation in the switching element and snubbers.
Absolute Maximum Ratings Parameters
VRRM IF(AV) Peak Repetitive Reverse Voltage Average Rectified Forward Current @ TC = 159C Per Diode Per Device IFSM TJ, TSTG Non Repetitive Peak Surge Current @ TJ = 25C Operating Junction and Storage Temperatures @ TC = 125C (FULLPACK) Per Diode 30 200 - 65 to 175 C
Max
200 15
Units
V A
Case Styles
30CTH02PbF
30CTH02FPPBF
Base Common Cathode
2
2
2 Common Cathode
1
3
1
Anode
Anode
Anode
Common Cathode
3 Anode
TO-220AB www.irf.com
TO-220 FULLPACK 1
30CTH02PbF, 30CTH02FPPBF
Bulletin PD-20894 rev. B 12/06
Electrical Characteristics @ TJ = 25C (unless otherwise specified)
Parameters
VBR, Vr VF Breakdown Voltage, Blocking Voltage Forward Voltage
Min Typ Max Units Test Conditions
200 V V V A A pF nH IR = 100A IF = 15A, TJ = 25C IF = 15A, TJ = 125C VR = VR Rated TJ = 125C, VR = VR Rated VR = 200V Measured lead to lead 5mm from package body
0.92 1.05 0.78 0.85 5 57 8 10 300 -
IR
Reverse Leakage Current
-
CT LS
Junction Capacitance Series Inductance
-
Dynamic Recovery Characteristics @ TC = 25C (unless otherwise specified)
Parameters
trr Reverse Recovery Time
Min Typ Max Units Test Conditions
26 40 2.8 6.0 37 120 35 30 nC A ns IF = 1A, diF/dt = 50A/s, VR = 30V IF = 1A, diF/dt = 100A/s, VR = 30V TJ = 25C TJ = 125C TJ = 25C TJ = 125C TJ = 25C TJ = 125C IF = 15A diF/dt = 200A/s VR = 160V
IRRM
Peak Recovery Current
-
Qrr
Reverse Recovery Charge
-
Thermal - Mechanical Characteristics
Parameters
TJ TStg RthJC Max. Junction Temperature Range Max. Storage Temperature Range Thermal Resistance, Junction to Case Device Marking - 65 Per Diode Fullpack (Per Diode)
Min
-
Typ
175 30CTH02 30CTH02FP
Max
175 1.1 3.5
Units
C C/W Case Style TO-220 Case Style Fullpack
Mounting Surface, Flat, Smooth and Greased
2
www.irf.com
30CTH02PbF, 30CH02FPPbF
Bulletin PD-20894 rev. B 12/06
100
( A)
100
Tj = 175C
10 1 0.1 0.01 0.001
150C 125C 100C 75C 50C 25C
Instantaneous Forward Current - I
Tj = 175C Tj = 125C
Reverse Current - I
F
(A)
R
0.0001 0 50 100 150 200
Reverse Voltage - VR (V) Fig. 2 - Typical Values of Reverse Current Vs. Reverse Voltage
10
Tj = 25C
1000
(pF)
T J = 25C
Junction Capacitance - C
T
100
1 0.4
10
0.6 0.8 1 1.2 1.4 1.6
0
50
100
150
200
Forward Voltage Drop - VFM (V) Fig. 1 - Typical Forward Voltage Drop Characteristics
Reverse Voltage - VR (V) Fig. 3 - Typical Junction Capacitance Vs. Reverse Voltage
10
(C/W)
thJC
Thermal Impedance Z
1
D = 0.50 D = 0.20 D = 0.10 D = 0.05 D = 0.02 D = 0.01
Notes:
PDM
t1 t2
0.1
Single Pulse (Thermal Resistance)
1. Duty factor D = t1/ t2
2. Peak Tj = Pdm x ZthJC + Tc
0.01 0.00001
0.0001 0.001 0.01 0.1 1 t1, Rectangular Pulse Duration (Seconds) Fig. 4 - Max. Thermal Impedance Z thJC Characteristics
10
www.irf.com
3
30CTH02PbF, 30CTH02FPPBF
Bulletin PD-20894 rev. B 12/06
10
(C/W)
Thermal Impedance Z
1
D = 0.50 D = 0.20 D = 0.10 D = 0.05 D = 0.02 D = 0.01
thJC
PDM
t1 t2
0.1
Single Pulse (Thermal Resistance)
Notes: 1. Duty factor D = t1/ t2
2. Peak Tj = Pdm x ZthJC + Tc
0.01 0.00001
0.0001
0.001
0.01
0.1
1
10
t1, Rectangular Pulse Duration (Seconds) Fig. 5 - Max. Thermal Impedance Z thJC Characteristics (FULLPACK)
180
Allowable Case Temperature (C) Allowable Case Temperature (C)
180 170 160 150 140 130 120
Square wave (D = 0.50) Rated Vr applied
170
DC
160
Square wave (D = 0.50)
DC
150 Rated Vr applied
see note (2)
110 see note (2) 100 0 5 10 15 20
(A) F(AV)
140 0 5 10 15 20
(A) F(AV)
25
25
Average Forward Current - I
Average Forward Current - I
Fig. 6 - Max. Allowable Case Temperature Vs. Average Forward Current
Fig. 7 - Max. Allowable Case Temperature Vs. Average Forward Current (FULLPACK)
25
Average Power Loss ( Watts )
20 15 10 5 0 0
DC
RMS Limit
D = 0.01 D = 0.02 D = 0.05 D = 0.1 D = 0.2 D = 0.5
(2) Formula used: TC = TJ - (Pd + PdREV) x RthJC ; Pd = Forward Power Loss = IF(AV) x VFM @ (IF(AV) / D) (see Fig. 8); PdREV = Inverse Power Loss = VR1 x IR (1 - D); IR @ VR1 = rated VR
Average Forward Current - IF(AV) (A)
5
10
15
20
25
Fig. 8 - Forward Power Loss Characteristics
4
www.irf.com
30CTH02PbF, 30CH02FPPbF
Bulletin PD-20894 rev. B 12/06
100
IF = 15 A
1000
IF = 15 A
Qrr ( nC )
V R = 160V T J = 125C T J = 25C
trr ( ns )
100
V R = 160V T J = 125C T J = 25C
10 100
1000
10 100
1000
di F /dt (A/s ) Fig. 9 - Typical Reverse Recovery vs. di F /dt
di F /dt (A/s ) Fig. 10 - Typical Stored Charge vs. di F /dt
Reverse Recovery Circuit
VR = 200V
0.01 L = 70H D.U.T. dif/dt ADJUST
diF /dt
D G IRFP250 S
Fig. 11- Reverse Recovery Parameter Test Circuit
www.irf.com
5
30CTH02PbF, 30CTH02FPPBF
Bulletin PD-20894 rev. B 12/06
3
IF 0
t rr ta tb
4
Q rr
2
I RRM
0.5 I RRM di(rec)M/dt 0.75 I RRM
5
1
diF /dt f
4. Qrr - Area under curve defined by t rr and IRRM t rr x I RRM Q rr = 2 5. di (rec) M / dt - Peak rate of change of current during t b portion of t rr
1. diF/dt - Rate of change of current through zero crossing 2. IRRM - Peak reverse recovery current 3. trr - Reverse recovery time measured from zero crossing point of negative going IF to point where a line passing through 0.75 IRRM and 0.50 IRRM extrapolated to zero current
Fig. 13 - Reverse Recovery Waveform and Definitions
Outline Table
Conform to JEDEC outline TO-220AB
6
www.irf.com
30CTH02PbF, 30CH02FPPbF
Bulletin PD-20894 rev. B 12/06
Outline Table
2 1 Anode Common Cathode 3 Anode
Conforms to JEDEC Outline TO-220 FULLPACK Dimensions in millimeters and (inches)
Part Marking Information
IRXC Assembly Line EXAMPLE: THIS IS A 30CTH02 LOT CODE 1789 ASSEMBLED ON WW 19, 2001 IN THE ASSEMBLY LINE "C" PART NUMBER
INTERNATIONAL RECTIFIER LOGO ASSEMBLY LOT CODE
DATE CODE P = LEAD-FREE YEAR 1 = 2001 WEEK 19 LINE C
IRMX Assembly Line EXAMPLE: THIS IS A 30CTH02 LOT CODE 1789 ASSEMBLED ON WW 19, 2001
INTERNATIONAL RECTIFIER LOGO ASSEMBLY LOT CODE
PART NUMBER
DATE CODE YEAR 1 = 2001 WEEK 19 P = LEAD-FREE
www.irf.com
7
30CTH02PbF, 30CTH02FPPBF
Bulletin PD-20894 rev. B 12/06
Marking Information
EXAMPLE: THIS IS A 30CTH02FP LOT CODE 1789 ASSEMBLED ON WW 19, 2001 IN THE ASSEMBLY LINE "C" INTERNATIONAL RECTIFIER LOGO ASSEMBLY LOT CODE
PART NUMBER
DATE CODE YEAR 7 = 2001 WEEK 19 LINE C
Ordering Information Table
Device Code
30
1 1 2 3 4 5 6 7
C
2 -
T
3
H
4
02
5
FP
6
PbF
7
Current Rating (30 = 30A) C T H = Common Cathode = TO-220, D2Pak = HyperFast Recovery none = TO-220AB FP = TO-220 FULLPACK none = Standard Production PbF = Lead-Free
Voltage Rating (02 = 200V)
Tube Standard Pack Quantity: 50 pieces
Data and specifications subject to change without notice. This product has been designed and qualified for AEC Q1O1 Level and Lead-Free. Qualification Standards can be found on IR's Web site.
IR WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245, USA Tel: (310) 252-7105 TAC Fax: (310) 252-7309 Visit us at www.irf.com for sales contact information. 12/06
8
www.irf.com

▲Up To Search▲

Price & Availability of 30CTH02FPPBF

	To Download 30CTH02FPPBF Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .